[[documentation:installation_wanpipe]]

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Prochaine révision
Révision précédente
documentation:installation_wanpipe [2012/07/26 17:08]
shimaore créée
documentation:installation_wanpipe [2012/09/17 08:15] (Version actuelle)
Ligne 5: Ligne 5:
  
  
-*Firmware+====== ​Firmware ​====== 
 From [[http://​wiki.sangoma.com/​wanpipe-linux-aft-firmware-update]] :  [[ftp://​ftp.sangoma.com/​firmware/​A104dm_0100_V44.BIN]] From [[http://​wiki.sangoma.com/​wanpipe-linux-aft-firmware-update]] :  [[ftp://​ftp.sangoma.com/​firmware/​A104dm_0100_V44.BIN]]
   ​   ​
  
-*Driver+====== ​Driver ​====== 
 [[http://​wiki.sangoma.com/​Wanpipe-Linux-Driver]] [[http://​wiki.sangoma.com/​Wanpipe-Linux-Driver]]
  
-Dependencies:+====== ​Dependencies ​====== 
   aptitude install gcc g++ automake autoconf libtool make  libncurses5-dev flex bison patch linux-headers-$(uname ​ -r) sqlite3 libsqlite3-dev **   aptitude install gcc g++ automake autoconf libtool make  libncurses5-dev flex bison patch linux-headers-$(uname ​ -r) sqlite3 libsqlite3-dev **
  
 [[ftp://​ftp.sangoma.com/​linux/​current_wanpipe/​wanpipe-3.5.27.tgz]] [[ftp://​ftp.sangoma.com/​linux/​current_wanpipe/​wanpipe-3.5.27.tgz]]
  
-Installation[[http://​wiki.sangoma.com/​Wanpipe-Driver#​wanpipe-linux-installation]]+====== ​Installation ​====== 
 + 
 + 
 +[[http://​wiki.sangoma.com/​Wanpipe-Driver#​wanpipe-linux-installation]]
  
 Yate uses [[http://​yate.null.ro/​pmwiki/​index.php?​n=Main.Wpcard]] Yate uses [[http://​yate.null.ro/​pmwiki/​index.php?​n=Main.Wpcard]]
 .. apparently in B+D (HDLC) mode .. apparently in B+D (HDLC) mode
  
-*Build driver package+====== ​Build driver package ​====== 
  
   # Modified /​etc/​apt/​sources.list to use `testing main`.   # Modified /​etc/​apt/​sources.list to use `testing main`.
Ligne 57: Ligne 64:
   ./Setup builddeb --64bit_4GB --no_woomera   ./Setup builddeb --64bit_4GB --no_woomera
  
-Screenshot:+====== ​Screenshot ​====== 
  
   root@ss7-gw2:/​usr/​src/​wanpipe-3.5.27#​ ./Setup builddeb --64bit_4GB --no_woomera   root@ss7-gw2:/​usr/​src/​wanpipe-3.5.27#​ ./Setup builddeb --64bit_4GB --no_woomera
Ligne 92: Ligne 100:
   Would you like to build WANPIPE DEB ? (y/n) **y**   Would you like to build WANPIPE DEB ? (y/n) **y**
  
-*Installation of the driver+====== ​Installation of the driver ​====== 
  
   dpkg -i --force-overwrite wanpipe_35275-k320-3-rt-amd64_x86_64.deb   dpkg -i --force-overwrite wanpipe_35275-k320-3-rt-amd64_x86_64.deb
  
-*Test+====== ​Test ====== 
   ​   ​
   /​usr/​sbin/​wanrouter hwprobe   /​usr/​sbin/​wanrouter hwprobe
Ligne 113: Ligne 123:
  
  
-*Update firmware+====== ​Update firmware ​====== 
  
 <​code>​ <​code>​
Ligne 159: Ligne 170:
 </​code>​ </​code>​
  
-*Configuring Wanpipe+====== ​Configuring Wanpipe ​====== 
  
 [[http://​wiki.sangoma.com/​wanpipe-linux-yate-configuration]] (uses wpchan) (but I guess the comment on MTU/MRU for bearer channels still applies? MTU/​MRU=2400 -> 10ms for 30 channels) [[http://​wiki.sangoma.com/​wanpipe-linux-yate-configuration]] (uses wpchan) (but I guess the comment on MTU/MRU for bearer channels still applies? MTU/​MRU=2400 -> 10ms for 30 channels)
Ligne 165: Ligne 177:
 [[http://​www.sangoma.com/​assets/​docs/​misc/​2008_09_18_Conferencing_with_Sangoma_Wanpipe.pdf]] [[http://​www.sangoma.com/​assets/​docs/​misc/​2008_09_18_Conferencing_with_Sangoma_Wanpipe.pdf]]
  
-All Yate docs for ysgichan / ss7 indicate that wpcard should be used; the Sangoma doc therefor would suggest:+All Yate docs for ysgichan / ss7 indicate that wpcard should be used; the Sangoma doc therefor would suggest: ​[[Config Wanpipe]]
  
 (Issues I had: (Issues I had:
Ligne 175: Ligne 187:
  
  
-*Operations+====== ​Operations ​====== 
 Once the ports are up, `wanpipemon -g` is very useful. Once the ports are up, `wanpipemon -g` is very useful.
  
  
  
  • documentation/installation_wanpipe.txt
  • Dernière modification: 2012/09/17 08:15
  • (modification externe)