documentation:installation_wanpipe

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Prochaine révision 		Révision précédente
documentation:installation_wanpipe [2012/07/26 17:08]
shimaore créée 		documentation:installation_wanpipe [2012/09/17 08:15] (Version actuelle)
Ligne 5: Ligne 5:
  
  
-*Firmware+====== Firmware ====== 
 From [[http://wiki.sangoma.com/wanpipe-linux-aft-firmware-update]] :  [[ftp://ftp.sangoma.com/firmware/A104dm_0100_V44.BIN]] From [[http://wiki.sangoma.com/wanpipe-linux-aft-firmware-update]] :  [[ftp://ftp.sangoma.com/firmware/A104dm_0100_V44.BIN]]
      
  
-*Driver+====== Driver ====== 
 [[http://wiki.sangoma.com/Wanpipe-Linux-Driver]] [[http://wiki.sangoma.com/Wanpipe-Linux-Driver]]
  
-Dependencies:+====== Dependencies ====== 
   aptitude install gcc g++ automake autoconf libtool make  libncurses5-dev flex bison patch linux-headers-$(uname  -r) sqlite3 libsqlite3-dev **   aptitude install gcc g++ automake autoconf libtool make  libncurses5-dev flex bison patch linux-headers-$(uname  -r) sqlite3 libsqlite3-dev **
  
 [[ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.5.27.tgz]] [[ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.5.27.tgz]]
  
-Installation: [[http://wiki.sangoma.com/Wanpipe-Driver#wanpipe-linux-installation]]+====== Installation ====== 
 + 
 + 
 +[[http://wiki.sangoma.com/Wanpipe-Driver#wanpipe-linux-installation]]
  
 Yate uses [[http://yate.null.ro/pmwiki/index.php?n=Main.Wpcard]] Yate uses [[http://yate.null.ro/pmwiki/index.php?n=Main.Wpcard]]
 .. apparently in B+D (HDLC) mode .. apparently in B+D (HDLC) mode
  
-*Build driver package+====== Build driver package ====== 
  
   # Modified /etc/apt/sources.list to use `testing main`.   # Modified /etc/apt/sources.list to use `testing main`.
Ligne 57: Ligne 64:
   ./Setup builddeb --64bit_4GB --no_woomera   ./Setup builddeb --64bit_4GB --no_woomera
  
-Screenshot:+====== Screenshot ====== 
  
   root@ss7-gw2:/usr/src/wanpipe-3.5.27# ./Setup builddeb --64bit_4GB --no_woomera   root@ss7-gw2:/usr/src/wanpipe-3.5.27# ./Setup builddeb --64bit_4GB --no_woomera
Ligne 92: Ligne 100:
   Would you like to build WANPIPE DEB ? (y/n) **y**   Would you like to build WANPIPE DEB ? (y/n) **y**
  
-*Installation of the driver+====== Installation of the driver ====== 
  
   dpkg -i --force-overwrite wanpipe_35275-k320-3-rt-amd64_x86_64.deb   dpkg -i --force-overwrite wanpipe_35275-k320-3-rt-amd64_x86_64.deb
  
-*Test+====== Test ====== 
      
   /usr/sbin/wanrouter hwprobe   /usr/sbin/wanrouter hwprobe
Ligne 113: Ligne 123:
  
  
-*Update firmware+====== Update firmware ====== 
  
 <code> <code>
Ligne 159: Ligne 170:
 </code> </code>
  
-*Configuring Wanpipe+====== Configuring Wanpipe ====== 
  
 [[http://wiki.sangoma.com/wanpipe-linux-yate-configuration]] (uses wpchan) (but I guess the comment on MTU/MRU for bearer channels still applies? MTU/MRU=2400 -> 10ms for 30 channels) [[http://wiki.sangoma.com/wanpipe-linux-yate-configuration]] (uses wpchan) (but I guess the comment on MTU/MRU for bearer channels still applies? MTU/MRU=2400 -> 10ms for 30 channels)
Ligne 165: Ligne 177:
 [[http://www.sangoma.com/assets/docs/misc/2008_09_18_Conferencing_with_Sangoma_Wanpipe.pdf]] [[http://www.sangoma.com/assets/docs/misc/2008_09_18_Conferencing_with_Sangoma_Wanpipe.pdf]]
  
-All Yate docs for ysgichan / ss7 indicate that wpcard should be used; the Sangoma doc therefor would suggest:+All Yate docs for ysgichan / ss7 indicate that wpcard should be used; the Sangoma doc therefor would suggest: [[Config Wanpipe]]
  
 (Issues I had: (Issues I had:
Ligne 175: Ligne 187:
  
  
-*Operations+====== Operations ====== 
 Once the ports are up, `wanpipemon -g` is very useful. Once the ports are up, `wanpipemon -g` is very useful.
  
  
  
  • documentation/installation_wanpipe.txt
  • Dernière modification: 2012/09/17 08:15
  • (modification externe)